: April 25, 2022 Posted by: bondstriet Comments: 0

Why does my trimmer line not feed?

Quote from video on Youtube:The trimmer line itself could be the wrong size for your trimmer or stuck in the trimmer. Head line that is too thick or too thin for the trimmer head won't feed properly.

How do you load a trimmer line?

Quote from video on Youtube:Thread each end of the line through the eyelets on the trimmer head as you connect the spool and bump knob wind the bump knob based on the arrows shown on the reel. Apply pressure to wind it evenly.

How do I fix the trimmer wire?

Quote from video on Youtube:These tell us the direction that the line needs to be wrapped. So we'll take our piece of trimmer line insert it into that hole to get it started wrap the direction of the arrows.

How do I feed my grass trimmer line?

Quote from video on Youtube:The spool will typically tell you which direction you need to wind the line in this case it's clockwise. I'll take both lines and wind them at the same time.

How do I fix the auto feed trimmer?

Quote from video on Youtube:First let's remove the cap over the reel. And you simply press in the tabs on the side. And you could easily pop off the top.

See also  How do I put line on my Black and Decker trimmer?

How does strimmer auto feed work?

With an auto feed system, the trimmer will release more line whenever it starts to run short, based on an advanced internal system. The majority of models will have some kind of component that gauges the current length of the line and then releases more by taking advantage of the spinning taking place with the head.

How do you wind a string trimmer?

Quote from video on Youtube:Note the winding direction arrows on the top of the spool. Turn the spool in this direction. And you will automatically wind the line onto the spool.

How do you wrap strimmer wire?

Insert the tip of the first length of trimmer line into one starter hole, and wind in the direction of the arrows. Wrap the line in neat, straight rows, to prevent jams later on. When there are about 5″ or 6″ of line remaining, snap it into the retainer on the spool to hold it in place.

How do you put spool wire on a strimmer?

Quote from video on Youtube:Line the trimmer line on to your spools you will need to locate the holes. Either one or two holes depending on whether it is a one or two line trimmer head located at the bottom of the spools. Once