Instructions
- Protect Your Tub. Cover the bottom of the tub with a thick drop cloth before you begin any work. …
- Remove the Overflow Plate. To snake your bathtub drain you will first need to remove the overflow plate to the tub. …
- Feed the Snake. …
- Snake the Drain. …
- Extract the Snake.
Can you use an auger on a bathtub?
Quote from video on Youtube:It. Now some tubs now some tubs don't have this little plate and if you don't have that consider yourself blessed but luckily with this thing because it's kind of a coiled.
How do you auger a bathtub drain?
Quote from video on Youtube:Okay. And now turn the drum and push steadily down push good you're going in going in okay now loosen the thumb screw. And then draw back so you get another four or five inches of wire exposed.
What is the easiest way to unclog a bathtub?
All you need to do is pour a pot of boiling water down the bathtub drain. Then pour a mixture of one cup baking soda and one cup vinegar into the drain. Insert the drain plug, or close the filter, and wait 5–10 minutes. Finally, flush the drain with another pot of boiling water.
Can you plunge a bathtub?
You can easily unclog your bathtub drain with a standard cup-style plunger, but you have to seal the overflow drain first. Tubs essentially have two drains: There’s the familiar one at the bottom of the tub that you close to fill up the tub with water.
Can’t get snake past trap tub?
Too much force – When you’re trying to dislodge a blockage, it can be tempting to try and force a snake cable through the drain too fast. If you force it, sometimes the cable can bend back on itself or kink. Instead of forcing the cable, extend the snake cable a few inches at a time until you reach the clog.
How do you fix a slow draining tub?
Six Ways to Fix a Slow-Draining Bathtub
- Use baking soda and vinegar (the natural alternative to chemicals).
- Use a plunger.
- Use a commercial (chemical) clog remover.
- Remove the drain stopper to inspect and gain access.
- Use a plumbers’ snake.
- Call a plumber.
How do you remove a bathtub drain without a tool?
Quote from video on Youtube:And some Tyler the locknut pliers stick the needle nose down in here. Use a little leverage. And the drain just spins right.
How do you auger a shower drain?
Quote from video on Youtube:Down. What you want to do is advance it a little bit at a time. And then lock it then twist it down the drain.
How do you unclog a bathtub with standing water naturally?
What you will need to do
- Pour 1 cup of water down your drain.
- Put the half cup of baking soda down the drain.
- Mix in the vinegar with your second prepared cup of water.
- Pour in the vinegar/water mixture down the drain with the added baking soda – Things will begin to bubble/fizz, this is good, it means things are working!
Why is my bathtub not draining?
You Have Clogged Drain Pipes
Of course, the most common reason why a bathtub won’t drain is due to clogged pipes. Over time, nearly all bathtub drains will develop clogs. These are most commonly caused by a combination of: Soap residue.
Can plunging make a clog worse?
Plungers are an effective way to clear a drain or unclog a toilet when used correctly. The key is to make sure a tight seal is formed around the drain and plunge slowly and methodically. Plunging too quickly or with too much force can prevent a tight seal from forming, making your efforts relatively ineffective.
How do you remove a bathtub?
Quote from video on Youtube:One of you will lift up the front edge of the tub. While another slides a couple of 1×4 is underneath it to get it off the floor. Slide the tub out of the alcove using the one by fours of skids.
How do you use a auger?
Quote from video on Youtube:As you're digging just let the weight of the machine do the work. If you hit a rock or tree root just stop the machine dig out the rock by. Hand. Then continue digging with the auger.
How do you plunge a shower drain?
Quote from video on Youtube:The third method is the plunger technique. With the overflow cover and stopper removed place a rag into a plastic bag and plug off the overflow.
How do you get a snake past a shower trap?
The proper way to use a snake is to insert the head into the drain and push very slowly without cranking. If you try to force it, it can bend back on itself and actually come out of the drain. Push gently and slowly, and if the auger is the right one for the job, it should slide smoothly through the pipe.
How do you snake a plastic drain shower?
How to Use Drain Snake
- Open the sink drain’s stopper. Chances are, you won’t even have to remove the stopper. …
- Place hair snake into bathroom sink drain. Place the sharp end of the hair snake into the drain. …
- Vigorously move around hair snake. …
- Pull out hair snake and clean. …
- Run water and test drain flow.
How do you make a drain auger?
Quote from video on Youtube:Support there the bottom is reinforced with a 3/4 piece of plywood that I beveled and cut in the bottom. And then I ran my carriage bolt through that and through a hole in the bottom of the bucket.