How do you replace a pop up sink plug?
Quote from video on Youtube:And without the wall in the way. So you can see exactly what needs to be done lift strap pivot rod and spring clip remove the pop-up plug loosen the slip nut that fastens a tail piece to the p-trap.
Can you replace a pop up sink plug with a normal plug?
Yes, but a waste that’s designed for a plug has a grille set down 10mm or so for the plug to sit on. But if you can find a suitable plug then happy days. I replaced the pop up plug with a standard 1.5″ plug and chain – leaving the horizontal rod with the threaded can in to stop sink waste water coming out.
How do you replace a pop up sink plug UK?
Quote from video on Youtube:Grip it and turn that anti-clockwise until it comes loose. And then when it's loose. It will just turn. Until it comes out and so there's a thread at the bottom that fits into the fitting.
How do you remove a basin waste nut?
Removing Your Old Basin Waste
- Step 1: Switch Off Your Water Supply. …
- Step 2: Unscrew The Basin Trap. …
- Step 4: Clean Up Any Residue. …
- Step 1: Apply Plumber’s Putty. …
- Step 2: Seal The Thread With PTFE Tape. …
- Step 3: Put The Basin Waste In The Basin Drain. …
- Step 4: Fit The Poly Washer And Nut. …
- Step 5: Tighten The Nut.