Most tie backs are 1 to 4 inches wide, but the lengths of the tie backs depend of the amount of curtain being pulled to the side. So it best to have the curtains sewn and installed before making the tie backs.
What size curtain tie backs do I need?
Hang each tieback hook a third of the way up from the bottom of the curtain. Buffer three inches from the edge of the window. For example, if your curtain is 84 inches long, you would place the tieback about 28 inches from the bottom. A tieback for a 36-inch long cafe curtain would be placed 12 inches from the bottom.
How do you measure for tie backs?
Measure 12 inches up from the bottom of the window or the curtains if the curtains are 55 inches long. Stand back while a friend pulls the curtain open at this level, and adjust it as necessary. Mark the wall at the desired level for the tieback.
How do you measure for curtain tie back hooks?
Quote from video on Youtube:You made a pencil mark where you're going to position the first type at hulk measured down from the pencil mark to the floor. Then repeat this measurement on the opposite side of the window.
Should curtain holdbacks be angled?
Should curtain hold backs be angled? There is no hard and fast rule on this, but generally many people position their curtain hold backs straight – if you prefer an angled look and find they still work practically then you can choose to do this.
Do curtains need tie backs?
Curtain tiebacks help you control the amount of light in your room. Generally, tiebacks should hang one-third of the way up from the bottom of the curtain. For example, if your curtain is 84 inches long, you would place the tieback about 28 inches from the bottom.
How do you make curtain tie backs?
Quote from video on Youtube:Just bunch together the curtain in the middle and secure the rope ends in the back with a simple knot.
What are the things that hold curtains back called?
A curtain knob consists of a decorative metal or wooden knob projecting directly out from the wall next to the curtain. The width of the knob serves to hold the curtain from spilling back into the window.
Can you use tie backs with eyelet curtains?
Eyelet curtains don’t need to be tied back because of how they drape, but you can install wall-mounted tie backs if you want to. From the top of the window frame, measure two-thirds down. Ropes or ribbon can be used to tie the curtains back.
What are tie back hooks?
These tiebacks are perfect when you want the option to hold back your drapes without adding wall-mounted hooks. Hold your curtain back in seconds, the magnets are strong enough to keep holding the curtain. Take them down is just as easy, and they can be tied on anywhere of the curtain when not in use.
What size curtain pole do I need for eyelet curtains?
The ideal diameter of a metal curtain pole for eyelets is 28mm. So if your pole is 28mm diameter or slightly smaller then it will be fine for your eyelet curtains.
How wide do eyelet curtains need to be?
Eyelet Curtains have a row of eyelets, usually metal, which can vary in diameter. This type of curtain is only to be hung with curtain rods — no tracks. Keep in mind that the curtain rod you use should be 32mm in diameter or less, otherwise the curtain will not glide smoothly along the rod when pulled open or closed.
How do you measure eyelet size?
Quote from video on Youtube:From sliding off the pole. Now measure the drop to measure the drop for eyelet heading measure from the top of the pole to the point where you want the bottom edge of the curtain to finish.
How much space should be between eyelets?
Generally, grommets are spaced about 6 inches apart on center. The first and last grommet are inset the space needed for the return to the wall, and in front of the window at the leading edge.