: April 24, 2022 Posted by: bondstriet Comments: 0

14 gauge14 gauge (14G) barbell, but you might get pierced with 16G (thinner than 14G) or even 12G (thicker than 14G) depending on your nipple size. You will most commonly be pierced with a straight barbell.

What length barbell is used for nipple piercings?

Real nipple piercings have a bar length between 12 and 19 mm, with 16 being the most used. Depending on the thickness of your own nipple you have to choose the size. It’s not unusual to have a size that is a bit to long for your nipple piercing, too small isn’t possible of course.

How do I know what size my nipple bars are?

The best way to measure the length of your nipple piercing barbell is to find a ruler and measure from inside the ends. If you have silver ball ends, do not measure past those ball ends, only measure the length of the shaft in-between them.

See also  What is the moral of the Summoner's Tale?

Is 14G bigger than 16G?

The lower the number, the thicker the gauge so 16g is thinner than a 14g.

Can I use a tongue bars for nipple piercings?

So yes you can. Tongue rings tend to have longer barbells and possible larger balls on some of them so use caution with using a tongue ring as a nipple ring.

What size industrial bar do I need?

Sizes. The standard size of a piercing diameter is usually 14 gauge, but some even go with a 16 gauge at first and then upgrade to a 14 gauge after the piercing has healed. It is actually easier to heal if the piercings are first pierced with captive bead rings in the hole, until the piercings have healed.

What is the standard size of a nipple piercing?

Standard piercing sizes

Piercing Standard Gauge Standard Length
Nipple Piercing 14G 3/8″ , 1/2″
Tragus / Helix / Rook / Conch / Daith 16G , 18G 3/16″, 1/4″ , 5/16″ and 3/8″
Septum 14G (16G is also commonly used) 3/8″, 7/16″, 1/2″, and 5/8″
Ear 20G and 18G

What gauge is an industrial piercing?

14g

What gauge is an industrial piercing? A. The starting gauge for industrial barbell piercings is typically 14g. If your piercing artist uses a 16g needle to make the holes for your industrial piercing, you can swap your starter jewelry out for a 14g barbell relatively easily once your piercings are healed.

Can you get an industrial piercing without the bar?

Can you get an industrial piercing without a barbell? No, an industrial piercing cannot be done without a barbell-style jewelry piece. The bar is necessary to keep the piercing in place and to allow for proper healing.

See also  Will rubbing alcohol remove henna?

What gauge is a lobe piercing?

20G

Gauge Size
Most earlobe piercings are made with a 20G needle, as are some nose piercings. Shop our 20g flat back earrings (aka Nap Earrings). An 18G needle can be used for earlobe piercings, nose piercings, as well as some cartilage piercings (e.g. forward helix).

Is 14G or 16G better for industrial piercing?

Most piercers will have a preference between 14 and 16g for industrial piercings and while having a 14g means you can swap out for 16g jewelry you cannot do it the other way around without pain. This piercing does not stretch well so it’s unusual to find industrial jewelry that is any bigger then 14g.

How big is 14G piercing?

1/16-inch

14 gauge = 1/16-inch or 1.6 millimeters.

What piercing hurts the most?

Piercing pain scale

  • Genital piercing. Your genitals are among the most nerve-dense areas on your body. …
  • Nipple piercing pain level. The nipple is another commonly pierced area that’s pretty sensitive. …
  • Nose piercing pain level. …
  • Dermal piercing pain.

What to know before getting an industrial?

Don’t worry we got you, here are 5 things you need to know before getting an industrial piercing.

  • Anatomy. Before going in to get an industrial piercing you want to go to your local piercing studio and get your ear checked by a professional piercer. …
  • If You’re Sick Don’t Get It. …
  • Clean Your Ears. …
  • Reputable Studio. …
  • Be Prepared.

What piercings look good with industrial?

Transverse Lobe + Industrial

Covering the top and bottom of your ear, the transverse lobe and industrial piercings are all the more powerful together. They offer symmetry that just feels so right. Everything in our life feels right just looking at the combination.

See also  What is the genre of A Tree Grows in Brooklyn?

How much is a bar piercing?

It typically costs somewhere around $30 – $70. As always, choose a quality piercer over expense. Never go to a piercer who uses a piercing gun. The piercer should use clean needles and gloves, and their piercing studio should look clean and professional.

What does industrial piercing look like?

The two holes are linked together by one barbell. When you get a traditional industrial piercing, it almost looks like someone has installed a little chin-up bar right across the top of your ear. Although, industrial piercings don’t have to go across the top of the ear.