
Designed for use in: DEWALT®: D51238K, DC608K; Porter Cable: BN200B – and also can be used with BOSTITCH: BT50B, BT200K-2, SB-1842BN, SB-1850BN, SB-2IN1; HITACHI; NT50AE2; PASLODE: T125-F18, T200-F18, IM200F18; SENCO: FP18, FP25XP; and RIDGID: R213BNA PBN18200-1 Features: -Brad nails.Assembled Diameter: 2 InchesProduct Dimensions: 5.51 x 2.36 x 0.59 inchesItem Package Quantity: 1
Can you use Bostitch nails in a Porter Cable nail gun?
Other brands that will fit are: Stanley Bostitch, Accuset, Duofast, Campbell Hausfeld, Hitachi, Atro, Paslode, Porter Cable and DeWalt. 1 of 1 found this helpful. Do you? The DEWALT DCS16 key is for 16 Gauge STRAIGHT not angled Finish Nails.
Will Bostitch brad nails fit Porter Cable?
I have used Porter Cable, Bostitch, Stanley, and other brands’ brads in Porter Cable, Bostitch, Stanley, and Hitachi nailers without any problems. As long as the gauge and the length are correct, I expect you should find success.
What nails are compatible with Porter Cable?
Product Description
The PORTER-CABLE PFN16200-1 2-Inch, 16 Gauge Finish Nails are galvanized coated with chisel point tips. Designed to fit DEWALT: D51256K, D51257K, DC616K, / PORTER CABLE: FN250B, FN250C.
Are nails for nail guns interchangeable?
You can use any brand nails as long as they are the same degree as your nailers and are within the length set for your gun.
What nails are compatible with Bostitch nail gun?
What Bostitch nails are compatible with my DEWALT and Porter Cable nail guns?
Fastener Item # | Description |
---|---|
RH-S10D131EP | 3″ x .131 Smooth Shank 21° Plastic Collated Stick Framing Nails |
SB16-2.50 | 2-1/2″ 16-Gauge Straight Finish Nails |
C6P90BDG | 2″ x .092 Smooth Shank 15° Coil Siding Nails |
Do you have to use Bostitch nails in a Bostitch nailer?
Any brand will work, just make sure get the correct size and angle if needed. I’ve used nails from Harbor Freight to Lowe’s with no problems.
Can a Brad nailer use different size nails?
Brad nailers use smaller 18-gauge nails.
Brad nails (often just called brads), are 18 gauge, which is 0.0475 of an inch. They vary in length from ½ to 2½ inches. By comparison, a 16-gauge finish nail is 0.0625-inch thick.
Can I use Dewalt brad nails in a Porter Cable nail gun?
nailers, 3 from Senco, 1 Porter Cable, 1 Dewalt, and one Makita. They all use the same nails, (up to 1 1/4″ length that is). Some 18 ga. nailers will shoot up to 2″ long brad nails, many less expensive nailers stop at 1 1/4″.
Will Porter Cable brad nails work in Dewalt?
brad nails, as they are standard in every way. They work in my Senco, Dewalt, and Bostitch nailers.
Can you use paslode nails in Bostitch?
all the different makes at 16 gauge should fit ok!, i have used all sorts of pins in my paslode (when it wants to work that is) with no noticable difference so vise versa should work too!, as for the gas im pretty sure i saw some blurb about bostitch guns being other makes friendly with gas!
Do Bostitch nails fit Hitachi?
Answer: Yes they are and fit my Hitachi finish nailer.
Are framing nails interchangeable?
For the most part, and with few exceptions, all paper collated nails will fit the same tools; all plastic collated nails will fit the same tools and all wire collated nails will do the same. When framing, using the right type of framing nails is just as important as choosing the right type of wood.
Can you use 18 gauge nails in a 16 gauge gun?
So, can you use 18 gauge nails in a 16 gauge nailer to attach exterior trim, molding, and other smaller jobs? Well, the short answer is- and we hate to tell you this-, you can’t.
What is the difference between 16 gauge and 18 gauge nails?
Gauge is actually the number of nails that are lined up. This indicates that 16-gauge nails are thicker and can hold better when compared to 18-gauge brads. You will have to keep in mind that a low gauge number will have a thicker nail.
Can you use 18 gauge nails for baseboards?
What gauge nails to use for baseboards? Based on nail size, you should be looking for anything between 15 gauge and 18 gauge. With these gauges it you can easily find nails up to 2.5” long which is an ideal length for baseboard nails.
What can I use if I don’t have a brad nailer?
If you don’t have a nail gun, there are other options. You can skip the brad nails with adhesive or staples. You can also install brad nails by hand or with a tool called a brad pusher. Brad pushers typically have the best results, as hand nailing brad nails into certain kinds of material can be difficult.
Can you use pin nails in a brad nailer?
For starters, brad nailers use a much larger 18 gauge nail. This nail has a much larger diameter head, which is why a brad nailer leaves a visible nail hold that must be covered with putty. Pin nailers, on the other hand, use a smaller 23 gauge nail.
What is the difference between Brad and finish nails?
Finish nails are stronger than brads, so choose them if your project needs to be durable. Brads are thin, 18-gauge nails made for more delicate woodworking jobs. They’re available in collated strips for nail guns or individual pieces. Brad nail length ranges from 1/2-inch to 2 1/2-inch.
Why is it called a brad nail?
In conclusion, a brad is called a brad because of its nature and its use in both paper and wooden projects. Brads are excellent choices when you want to conceal the nail in your work, unlike finished nails that have a bigger head. Brads have smaller heads and all these qualities are what make a brad a brad.
Can you hammer in finishing nails?
Avoid scratches or hammer dents by using a nail set to finish driving the nail. Use a nail set that is the same diameter as the finishing nail. Center it on top of the nail and hit it with the hammer. Continue hammering until the nail is about 1/8-inch below the surface of the wood.